Product Details
Owners of the 2006-2009 Subaru Outback 2.5i, 2.5i Limited can fit the Whiteline Rear Control Arm Service Kit. It goes on the rear of the vehicle. Trims named on the listing: 2.5i and 2.5i Limited. You receive 12 bushings, 6 tubes, and 8 washers. Whiteline's note for this fit: Service kit to suit Whiteline control arms KTA124. The chassis code on the listing is BP/BR. The part number is KSK124.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 2 hours. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts for the Outback.
Features
- Material: Polyurethane construction.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | KSK124 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2009 Subaru Outback 2.5i, 2.5i Limited |
| Chassis Code | BP/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing Quantity | 12 Bushing |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 12 Bushings, 6 tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Service kit to suit Whiteline control arms KTA124 |