Product Details
Whiteline built the Rear Control Arm Service Kit for the 2000-2008 Subaru Outback Base. Chassis code: BE/BH/BP/BR. This part is for the rear of the vehicle. The kit contains 12 bushings, 6 tubes, and 8 washers. The part number is KSK124. Trim named on the listing: Base. Whiteline's note for this fit: Service kit to suit Whiteline control arms KTA124.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Material: Built from polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | KSK124 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2008 Subaru Outback Base |
| Drivetrain | AWD |
| Chassis Code | BE/BH/BP/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing Quantity | 12 Bushing |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 12 Bushings, 6 tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Service kit to suit Whiteline control arms KTA124 |