Product Details
This Whiteline Rear Control Arm Lower Outer Bushing fits the 2001-2005 BMW 320i 3 Series (E46). You receive 2 shell bushings, 2 tubes, 2 bolts, and 4 nuts. It goes on the rear of the vehicle. The part number is W62384.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 2 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Strut Tower Brace Quick Release Kit for the 320i 3 Series.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: The part is made of polyurethane.
- Hardware: Supplied with mounting hardware.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W62384 |
| Part Name | Control Arm Bushing |
| Vehicle | 2001-2005 BMW 320i 3 Series |
| Chassis Code | E46 |
| Bushing 1 Inner Diameter | 11.9 mm |
| Bushing 1 Outer Diameter | 45.5 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 2 Bolts, 4 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

