Product Details
This Whiteline Rear Lower Outer Control Arm Bushing fits the 2000-2006 Honda CR-V SE (RD4). Whiteline's note for this fit: Suits models with cast arms. Position: rear. The kit contains 8 bushings and 4 tubes. Order it as part number W63382. Chassis code: RD4.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 16mm Adjustable Front Camber Bolts for the CR-V.
Features
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Built from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2006 Honda CR-V SE |
| Drivetrain | FWD/AWD |
| Chassis Code | RD4 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Includes 2 x 12mm and 2 x 14mm bolts. Suits models with cast arms. |



