Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2002-2006 Honda CR-V (RD4). The kit contains 4 bushings and 2 tubes. Application note: Standard Replacement. Chassis code: RD4. Placement: front. Order it as part number W53412.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the CR-V: 16mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Built from polyurethane.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | W53412 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2006 Honda CR-V |
| Drivetrain | FWD/AWD |
| Chassis Code | RD4 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


