Product Details
This Whiteline Rear Control Arm Lower Outer Bushing fits the 1990-1994 Suzuki Swift GA, GS, GT (EA/SA). The part number is W61463. Included: 4 bushings and 2 tubes. Position: rear.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Swift, see 12mm Adjustable Front Camber Bolts, Front Lower Inner Front Control Arm Bushing Kit, and Front Sway Bar Link Lower Bushing.
Features
- Material: Built from polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W61463 |
| Part Name | Control Arm Bushing |
| Vehicle | 1990-1994 Suzuki Swift GA, GS, GT |
| Chassis Code | EA/SA |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 30.5 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



