Product Details
This Whiteline Rear Control Arm Lower Front Outer Bushing fits the 2006-2014 Volkswagen Jetta GLI, TDI (1K/5K). In the box: 2 shell bushings and 2 tubes. Placement: rear. Order it as part number W63552.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Jetta, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W63552 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2014 Volkswagen Jetta GLI, TDI |
| Chassis Code | 1K/5K |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 40.4 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




