Product Details
This Whiteline Rear Control Arm Lower Front Inner and Outer Bushing fits the 2007-2012 Ford Focus S (C307). Position: rear. Chassis code: C307. The part number is W63320. Included: 4 shell bushings and 4 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link for the Focus.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: Polyurethane construction.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: The metal parts are powder coated for durability.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63320 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2012 Ford Focus S |
| Chassis Code | C307 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 32 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




