Product Details

This Whiteline Adjustable Front Sway Bar Link fits the 2008-2011 Ford Focus S, SE, SES (C307). Position: front. Order it as part number KLC106. In the box: 2 links.

A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.

Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Focus: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing.

Features

  • Preload-free setup: The length can be set on the car to remove preload from the sway bar.
  • Install guide: Instructions for fitting are packed in the box.
  • Ball joints: Steel ball joint ends are built for heavy loads and free movement.
  • Construction: High-strength alloy gives the strength needed without much weight.
  • Pre-greased: Comes pre-greased, so it can go straight on the car.
  • Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
Part Number KLC106
Part Name Sway Bar Link
Vehicle 2008-2011 Ford Focus S, SE, SES
Chassis Code C307
Adjustable Yes
Bolt Thread Diameter 10 mm
Grade Type Performance
Grease Fitting Included No
Greaseable No
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 2 Links
Length 230-255 mm
Locking Nuts Included Yes
Material Aluminum Alloy
Pre-Greased Yes
Washers Included Yes
Vehicle Placement Front
Wheel Alignment Required No
Notes -

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2008FordFocusFWD
2009FordFocusFWD
2010FordFocusFWD
2011FordFocusFWD

Customer Reviews

Questions & Answers