Product Details
This Whiteline Rear Control Arm Lower Front Inner and Outer Bushing fits the 2000-2012 Ford Focus SE (C170/C307). It goes on the rear of the vehicle. Included: 4 shell bushings and 4 tubes. Whiteline part number: W63320.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. To go with it on the Focus, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bonded design: A bonded design adds strength for high load applications.
- Material: Built from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63320 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2012 Ford Focus SE |
| Chassis Code | C170/C307 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 32 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



