Product Details
This Whiteline Front Sway Bar Washer Kit fits the 1986-1989 Pontiac Sunbird GT, SE (J-Body). Whiteline's note for this fit: Cupped washers only no bushings. It goes on the front of the vehicle. Part number KW2. The kit contains 8 washers.
The small washers at each end of a sway bar link do more than fill a gap: they keep the bushing compressed and centered on the link. Stronger washers help the link stay tight over time.
Installation is rated easy, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Sunbird, see 16mm Adjustable Front Camber Bolts, Front Sway Bar Link Bushing (28.5mm OD), and Rear Sway Bar Link Bushing (28.5mm OD).
Features
- Clamping force: Keeps clamping force on the link bushings where it should be.
- Cupped washers: Hardened, cupped steel washers replace weak or worn factory link washers.
- Case hardened: A corrosion-resistant, case-hardened build that is meant to last.
- Less play: Removes play from the link assembly, which helps cornering response.
- Wear resistance: Built so the washers do not bend or wear when the link is loaded and moved again and again.
Specifications
| Part Number | KW2 |
| Part Name | Sway Bar Washer Kit |
| Vehicle | 1986-1989 Pontiac Sunbird GT, SE |
| Chassis Code | J-Body |
| Color | Silver |
| Grade Type | Regular |
| Inside Diameter | 10.3 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Washers |
| Locking Type | No |
| Material | Steel mm |
| Thickness | 1.8 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Cupped washers only no bushings |




