Product Details
This Whiteline Front Track Bar Bushing Kit fits the 2007-2008 Jeep Wrangler (JK). Placement: front. The kit contains 2 shell bushings and 2 tubes. The part number is W83397. The chassis code on the listing is JK. Application note: Suits Models built through June of 2008.
The Panhard rod, or track bar, keeps the axle centered side to side, and its bushings are where it pivots. Soft or worn rubber lets the axle move sideways under cornering load, which shows up as back end squirm. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 1 hour. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Wrangler: Body Mount Bushing Kit, Front Upper and Lower Control Arm Bushing Kit, and Front Sway Bar Link Bushing Kit.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Written install instructions are included with the part.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W83397 |
| Part Name | Track Bar Bushings |
| Vehicle | 2007-2008 Jeep Wrangler |
| Chassis Code | JK |
| Drivetrain | 4WD/RWD |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Improved Design |
| Grade Type | Performance |
| Grade Type | Premium |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Suits Models built through June of 2008 |