Product Details
The Whiteline Front Sway Bar Link (Lowered Apps Only) fits the 2012 Chevrolet Camaro ZL1 (Zeta). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Order it as part number KLC178. Placement: front. Trim named on the listing: ZL1. Included: 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Working on the same car? We also list Front and Rear Sway Bar Kit, Front Steering Rack And Pinion Mount Bushing, and Rear Subframe Mount Bushing for the Camaro.
Features
- Construction: Made from strong, light alloy.
- Install guide: Step-by-step installation instructions come with it.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Hardware: The kit includes locking nuts and washers.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC178 |
| Part Name | Sway Bar Link |
| Vehicle | 2012 Chevrolet Camaro ZL1 |
| Chassis Code | Zeta |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 370-395 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Lowered vehicle applications with 10mm studs - Adjustable Extra Heavy Duty. Length 360-385mm. |