Product Details
This Whiteline Front Sway Bar Link fits the 2016-2018 Ford Focus (C346). You receive 2 links. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Position: front. The part number is KLC140-295.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Sway Bar Vehicle Link Kit for the Focus.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Install guide: Written install instructions are included with the part.
- Hardware: The kit includes locking nuts and washers.
Specifications
| Part Number | KLC140-295 |
| Part Name | Sway Bar Link |
| Vehicle | 2016-2018 Ford Focus |
| Drivetrain | FWD |
| Chassis Code | C346 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 290-315 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 290-315mm. Bolt Diameter 10mm. |


