Product Details
This Whiteline Front Sway Bar Link Bushing fits the 2002-2004 Subaru Outback H6. The chassis code on the listing is BE/BH/BP. The listing names the H6 trim. The part number is W22259. Placement: front. The kit contains 8 bushings, 4 tubes, 4 washers, and grease.
The bar can only resist roll as well as its links are attached. A worn link bushing adds slack that the bar must take up before it works, so replacing it is a low-cost way to bring back sharp response. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the Outback, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
Specifications
| Part Number | W22259 |
| Part Name | Sway Bar Link Bushing |
| Vehicle | 2002-2004 Subaru Outback H6 |
| Chassis Code | BE/BH/BP |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Durometer | 72 |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Bushings, 4 Tubes, 4 Washers, Grease |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |