Product Details

This Whiteline Adjustable Front Sway Bar Link fits the 2017 Dodge Journey GT (JC49). It goes on the front of the vehicle. The kit contains 2 links. Part number KLC163.

A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.

Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Journey: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Front Bushing (14mm ID).

Features

  • Preload-free setup: Setting the length on the car lets the bar rest without preload.
  • Hardware: Also in the box: locking nuts and washers.
  • Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
  • Install guide: Whiteline packs an install guide with it.
  • Construction: The body is made from high-grade alloy for strength without added weight.
  • Anodized alloy: The alloy carries an anodized finish for durability.
Specifications
Part Number KLC163
Part Name Sway Bar Link
Vehicle 2017 Dodge Journey GT
Drivetrain FWD/AWD
Chassis Code JC49
Adjustable Yes
Bolt Thread Diameter 10 mm
Grade Type Performance
Grease Fitting Included No
Greaseable No
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 2 Links
Length 270-295 mm
Locking Nuts Included Yes
Material Aluminum Alloy
Pre-Greased Yes
Washers Included Yes
Vehicle Placement Front
Wheel Alignment Required No
Notes Length 270-295mm. Bolt Diameter 10mm.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2017DodgeJourneyFWDLength 270-295mm. Bolt Diameter 10mm.
2017DodgeJourneyAWDLength 270-295mm. Bolt Diameter 10mm.

Customer Reviews

Questions & Answers