Product Details
These Whiteline Adjustable Front Sway Bar Drop Links fit the 2010 Mitsubishi Lancer Evolution MR Touring (CY). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Included: 2 links. This part is for the front of the vehicle. Order it as part number KLC139.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Lancer Evolution, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and Front and Rear Sway Bar Kit.
Features
- Warranty: Whiteline backs it with a warranty listed at 3 years and 60,000 miles.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Hardware: Supplied with locking nuts and washers.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Material: Steel construction.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2010 Mitsubishi Lancer Evolution MR Touring |
| Drivetrain | AWD |
| Chassis Code | CY |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |



