Product Details
These Whiteline Adjustable Front Sway Bar Drop Links fit the 2007 Subaru Outback 2.5i Basic (BR). Part number KLC139. Position: front. Application note: Adjustable Extra Heavy Duty. The kit contains 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Outback, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Warranty: Covered by a warranty that Whiteline lists at 3 years and 60,000 miles.
- Hardware: Supplied with locking nuts and washers.
- Responsiveness: Sharpens the car's reaction in lane changes and through corners.
- Material: Steel construction.
Specifications
| Part Number | KLC139 |
| Part Name | Sway Bar Link |
| Vehicle | 2007 Subaru Outback 2.5i Basic |
| Chassis Code | BR |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 65-70 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm. |




