Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2010 Volkswagen Jetta TDI Cup Edition (1K). Whiteline's note for this fit: Adjustable Extra Heavy Duty. In the box: 2 links. Order it as part number KLC167A. Placement: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Jetta, see Adjustable Rear Sway Bar Link, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Install guide: Whiteline packs an install guide with it.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: Supplied with locking nuts and washers.
Specifications
| Part Number | KLC167A |
| Part Name | Sway Bar Link |
| Vehicle | 2010 Volkswagen Jetta TDI Cup Edition |
| Chassis Code | 1K |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 320-345 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 320-345mm. Bolt Diameter 12mm. |




