Product Details
Fitted to the 2008-2014 Toyota FJ Cruiser Premium (J150): the Whiteline Front Sway Bar Link. The part number is KLC220. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Placement: front. Trim named on the listing: Premium. In the box: 2 links and 6 washers.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward. To go with it on the FJ Cruiser, see Front Steering Rack And Pinion Mount Bushing, Rear Sway Bar Link, and Front Upper Control Arm Bushing Kit.
Features
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Install guide: Step-by-step installation instructions come with it.
- Hardware: Hardware supplied: locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | KLC220 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2014 Toyota FJ Cruiser Premium |
| Chassis Code | J150 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 6 Washers |
| Length | 125-150 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 125-150mm. Bolt Diameter 12mm. |