Product Details
Fitted to the 2005-2006 Mazda 3 SP23 (BK): the Whiteline Adjustable Front Sway Bar Link. You receive 2 links and 8 washers. Whiteline part number: KLC151. It goes on the front of the vehicle. Application note: Adjustable extra heavy duty. The listing names the SP23 trim.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Working on the same car? We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing for the Mazda 3.
Features
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Construction: High-strength alloy gives the strength needed without much weight.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Hardware: The kit includes locking nuts and washers.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2006 Mazda 3 SP23 |
| Chassis Code | BK |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


