Product Details
Looking for a front sway bar link for your 2002-2006 Ford Focus ZX5 (C170)? The Whiteline Adjustable Front Sway Bar Link is made for it. Trim named on the listing: ZX5. Whiteline part number: KLC151. Application note: Adjustable extra heavy duty. This part is for the front of the vehicle. The kit contains 2 links and 8 washers.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Working on the same car? We also list Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing for the Focus.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Construction: High-strength alloy gives the strength needed without much weight.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Hardware: Supplied with locking nuts and washers.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2006 Ford Focus ZX5 |
| Chassis Code | C170 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


