Product Details
Whiteline Adjustable Front Sway Bar Link is made for the 2002-2004 Ford Focus SVT, ZTW. It is listed for the C170 chassis. Whiteline part number: KLC151. Included: 2 links and 8 washers. Position: front. Trims named on the listing: SVT and ZTW. Whiteline's note for this fit: Adjustable extra heavy duty.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Focus: Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Install guide: Step-by-step installation instructions come with it.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2004 Ford Focus SVT, ZTW |
| Chassis Code | C170 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


