Product Details
Owners of the 2000 Ford Focus Sony Limited Edition (C170) can fit the Whiteline Adjustable Front Sway Bar Link. Whiteline's note for this fit: Adjustable extra heavy duty. This part is for the front of the vehicle. The listing names the Sony Limited Edition trim. In the box: 2 links and 8 washers. The part number is KLC151.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Focus: Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Construction: Made from strong, light alloy.
- Install guide: Whiteline packs an install guide with it.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Hardware: Also in the box: locking nuts and washers.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2000 Ford Focus Sony Limited Edition |
| Chassis Code | C170 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |