Product Details
The Whiteline Adjustable Front Sway Bar Link fits the 2000-2004 Ford Focus LX, ZTS. Whiteline's note for this fit: Adjustable extra heavy duty. In the box: 2 links and 8 washers. Chassis code: C170. The listing names the LX and ZTS trims. Part number KLC151. Position: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. To go with it on the Focus, see Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Construction: High-strength alloy gives the strength needed without much weight.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Install guide: Instructions for fitting are packed in the box.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2004 Ford Focus LX, ZTS |
| Chassis Code | C170 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |