Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 1992-2000 Lexus SC400 (Z30). The part number is KLC141. In the box: 2 links. Application note: Suits models with control arm link mount: adjustable extra heavy duty. Chassis code: Z30. Placement: front.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect an easy job of about 1 hour. It does not require a wheel alignment. To go with it on the SC400, see Front and Rear Sway Bar Kit, Front Steering Rack And Pinion Mount Bushing, and Front Control Arm Lower Inner Front Bushing.
Features
- Material: Steel construction.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: Instructions for fitting are packed in the box.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Hardware: Hardware supplied: locking nuts and washers.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 1992-2000 Lexus SC400 |
| Drivetrain | RWD |
| Chassis Code | Z30 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |




