Product Details
This Whiteline Front Strut Mount Bushing fits the 2008 Toyota FJ Cruiser (J150). The part number is W44106. You receive 6 bushings and 4 washers. Placement: front. Whiteline's note for this fit: Includes top spring pad.
Worn strut mount bushings are a common source of creaks and clunks from the front end. Replacing them restores a firm connection at the top of the strut. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1.5 hours of work listed. An alignment is required after installation. To go with it on the FJ Cruiser, see Rear Sway Bar Link, Front Sway Bar Link, and Front Steering Rack And Pinion Mount Bushing.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | W44106 |
| Part Name | Strut Mount Bushing |
| Vehicle | 2008 Toyota FJ Cruiser |
| Drivetrain | RWD/4WD |
| Chassis Code | J150 |
| Bearing(s) Included | No |
| Bolt Included | No |
| Bumper Included | No |
| Coil Spring Seat Included | Yes |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Insulator Included | Yes |
| Kit Contents | 6 Bushings, 4 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Nuts Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Includes top spring pad |



