Product Details
This Whiteline Front Strut Mount Bushing fits the 2007 Toyota FJ Cruiser TRD Special Edition (J150). Whiteline's note for this fit: Includes top spring pad. The part number is W44106. It goes on the front of the vehicle. You receive 6 bushings and 4 washers.
The strut top mount joins the upper end of the strut to the body, and the bushing in it cushions the connection while letting the strut turn with the wheel. When it fails, the front end creaks over speed humps and driveways, and the strut can move out of position. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1.5 hours. An alignment is required after installation. Other Whiteline parts we list for the FJ Cruiser: Rear Sway Bar Link, Front Sway Bar Link, and Front Steering Rack And Pinion Mount Bushing.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Whiteline packs an install guide with it.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | W44106 |
| Part Name | Strut Mount Bushing |
| Vehicle | 2007 Toyota FJ Cruiser TRD Special Edition |
| Drivetrain | RWD/4WD |
| Chassis Code | J150 |
| Bearing(s) Included | No |
| Bolt Included | No |
| Bumper Included | No |
| Coil Spring Seat Included | Yes |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Insulator Included | Yes |
| Kit Contents | 6 Bushings, 4 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Nuts Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Includes top spring pad |



