Product Details

This Whiteline Front Steering Bump Steer Correction Kit fits the 2008-2011 Ford Focus SES (C307). The part number is KCA405. The kit contains 3 bolts and 9 washers. Chassis code: C307. Position: front.

Bump steer is the car steering itself as the suspension moves up and down over bumps, and it gets worse when a car is lowered. A correction kit changes the geometry of the steering linkage so the wheels stay pointed where you aim them.

Installation is rated difficult, with about 2.5 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Focus: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.

Features

  • Roll center: Corrects roll-center geometry that changes when a car is lowered.
  • Install guide: Step-by-step installation instructions come with it.
  • Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
Part Number KCA405
Part Name Bump Steer Correction Kit
Vehicle 2008-2011 Ford Focus SES
Chassis Code C307
Installation Difficulty Difficult
Installation Time (hrs) 2.5
Kit Contents 3 Bolts, 9 Washers
Wheel Alignment Required Yes
Notes Reduces Factory Toe Out From 6mm to 1mm at 60mm bump

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2008FordFocusFWDReduces Factory Toe Out From 6mm to 1mm at 60mm bump
2009FordFocusFWDReduces Factory Toe Out From 6mm to 1mm at 60mm bump
2010FordFocusFWDReduces Factory Toe Out From 6mm to 1mm at 60mm bump
2011FordFocusFWDReduces Factory Toe Out From 6mm to 1mm at 60mm bump

Customer Reviews

Questions & Answers