Product Details
This Whiteline Front Shock Absorber To Control Arm Bushing fits the 2011-2012 Mazda MX-5 Miata Special Edition (NC). Order it as part number W33338. Chassis code: NC. Included: 2 shell bushings, 2 tubes, and grease. This part is for the front of the vehicle.
Shock bushings take the shock's loads and let it pivot slightly as the suspension moves. If they are worn, you may hear a clunk and feel less control over bumps. Replacing them is an easy way to quiet and tighten that corner. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. To go with it on the MX-5 Miata, see Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Bonded design: The bushing is bonded for strength where loads are highest.
Specifications
| Part Number | W33338 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011-2012 Mazda MX-5 Miata Special Edition |
| Drivetrain | RWD |
| Chassis Code | NC |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



