Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2006-2015 Mazda MX-5 Miata (NC). Whiteline's note for this fit: Adjustable Extra Heavy Duty. Included: 2 links. Whiteline part number: KLC144. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. To go with it on the MX-5 Miata, see Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Front and Rear Sway Bar Kit.
Features
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Install guide: An install guide comes in the box.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Hardware: The kit includes locking nuts and washers.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2006-2015 Mazda MX-5 Miata |
| Drivetrain | RWD |
| Chassis Code | NC |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |



