Product Details
This Whiteline Front Shock Absorber To Control Arm Bushing fits the 2006-2008 Dodge Magnum SRT8 (LX). It goes on the front of the vehicle. The kit contains 2 shell bushings, 2 tubes, 4 washers, an install guide, and grease. The part number is W33333.
Shock bushings take the shock's loads and let it pivot slightly as the suspension moves. If they are worn, you may hear a clunk and feel less control over bumps. Replacing them is an easy way to quiet and tighten that corner. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. To go with it on the Magnum, see Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
Specifications
| Part Number | W33333 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2008 Dodge Magnum SRT8 |
| Drivetrain | RWD/AWD |
| Chassis Code | LX |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 94 |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 4 Washers, Install Guide, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



