Product Details
This Whiteline Front Lower Radius Arm Bushing fits the 2007-2008 BMW 335xi 3 Series (E90/E91/E92/E93). Whiteline's note for this fit: Adds +/- 0.5 degrees Caster. It goes on the front of the vehicle. You receive 2 bushings and 2 tubes. Order it as part number KCA430.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Expect a moderate job of about 3 hours. An alignment is required after installation. To go with it on the 335xi 3 Series, see Adjustable Front Sway Bar Link, Rear Subframe Mount Bushing, and Rear Differential Mount Bushing.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Written install instructions are included with the part.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Material: The part is made of polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
Specifications
| Part Number | KCA430 |
| Part Name | Radius Arm Bushing |
| Vehicle | 2007-2008 BMW 335xi 3 Series |
| Chassis Code | E90/E91/E92/E93 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 70.7 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 70.7 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5 Deg Caster |

