Product Details
This Whiteline Front Lower Inner Rear Control Arm Bushing Kit - Double Offset fits the 1991-1995 Honda Civic. The chassis code on the listing is EG. Whiteline's note for this fit: Adds +1.0 degrees caster. In the box: 2 bushings and 2 tubes. This part is for the front of the vehicle. Part number KCA527.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. Working on the same car? We also list Adjustable Rear Upper Control Arm Set, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit for the Civic.
Features
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Material: Made from polyurethane.
- Install guide: Instructions for fitting are packed in the box.
- Grease: Molybdenum disulfide grease is included to help the parts last.
Specifications
| Part Number | KCA527 |
| Part Name | Control Arm Bushings |
| Vehicle | 1991-1995 Honda Civic |
| Chassis Code | EG |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 24 mm |
| Bushing 1 Outer Diameter | 41 mm |
| Bushing 2 Inner Diameter | 24 mm |
| Bushing 2 Outer Diameter | 41 mm |
| Bushing Quantity | 2 |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +1.0 degrees caster |