Product Details
This Whiteline Front Upper Control Arm Bushing (Standard Repl.) fits the 2006-2008 Dodge Magnum SRT8 (LX). Order it as part number W53337. You receive 4 shell bushings and 4 tubes. Application note: Standard Replacement. This part is for the front of the vehicle.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Expect a moderate job of about 3 hours. An alignment is required after installation. To go with it on the Magnum, see Front and Rear Sway Bar Kit, Rear Trailing Arm Lower Front Bushing, and Rear Subframe Mount Bushing.
Features
- Material: The part is made of polyurethane.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Step-by-step installation instructions come with it.
- Finish: A powder coated finish resists corrosion and wear.
Specifications
| Part Number | W53337 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2008 Dodge Magnum SRT8 |
| Drivetrain | RWD/AWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 51.5 mm |
| Bushing 2 Outer Diameter | 50 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



