Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2007-2009 Mazda MX-5 Miata SV (NC). You receive 4 bushings and 4 tubes. Whiteline part number: KCA421. Placement: front. Application note: Adds 0.5 degrees Camber.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link for the MX-5 Miata.
Features
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Material: Polyurethane construction.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | KCA421 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2009 Mazda MX-5 Miata SV |
| Drivetrain | RWD |
| Chassis Code | NC |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 33.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 10.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.1 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


