Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2006 Mazda MX-5 Miata Base, Club Spec (NC). Position: front. Part number KCA421. Whiteline's note for this fit: Adds 0.5 degrees Camber. Included: 4 bushings and 4 tubes.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link for the MX-5 Miata.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Built from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Finish: The metal parts are powder coated for durability.
Specifications
| Part Number | KCA421 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006 Mazda MX-5 Miata Base, Club Spec |
| Drivetrain | RWD |
| Chassis Code | NC |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 33.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 10.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.1 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |



