Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2005 Mazda MX-5 Miata Base, LS, Mazdaspeed (NB). You receive 4 bushings and 4 tubes. Application note: Adds 0.5 degrees Camber. Part number KCA421. This part is for the front of the vehicle.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the MX-5 Miata: Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Strut Tower Brace.
Features
- Finish: A powder coated finish resists corrosion and wear.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA421 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005 Mazda MX-5 Miata Base, LS, Mazdaspeed |
| Chassis Code | NB |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 33.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 10.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.1 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


