Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2004-2005 Mazda MX-5 Miata Mazdaspeed (NB). Position: front. In the box: 4 bushings and 4 tubes. Part number KCA452. Application note: Adds 0.5 degrees Camber: "Approved for Spec Miata in both SCCA and NASA".
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Strut Tower Brace for the MX-5 Miata.
Features
- Install guide: Step-by-step installation instructions come with it.
- Material: Made from polyurethane.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA452 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2005 Mazda MX-5 Miata Mazdaspeed |
| Chassis Code | NB |
| Bushing 1 Inner Diameter | 15 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 14.3 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 40.3 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber - "Approved for Spec Miata in both SCCA and NASA" |



