Product Details
The Whiteline Front Upper Control Arm Bushing Kit fits the 1999-2001 Acura Integra GS-R. This part is for the front of the vehicle. Included: 4 bushings and 4 tubes. The part number is KCA378. The listing names the GS-R trim. It is listed for the DC2 chassis.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. Working on the same car? We also list 2-Point Adjustable 22mm Rear Sway Bar, Front Roll Center Correction Kit, and 24mm Rear Sway Bar Bushing Kit for the Integra.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Material: Made from polyurethane.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
Specifications
| Part Number | KCA378 |
| Part Name | Control Arm Bushing |
| Vehicle | 1999-2001 Acura Integra GS-R |
| Chassis Code | DC2 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 34.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34.4 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | 34mm OD bushing adds 1.0 Degrees |