Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1997 Mazda MX-5 Miata STO (NA/NB). Whiteline's note for this fit: Adds 0.5 degrees Camber: "Approved for Spec Miata in both SCCA and NASA". Order it as part number KCA452. This part is for the front of the vehicle. The kit contains 4 bushings and 4 tubes.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the MX-5 Miata: Adjustable Sway Bar Vehicle Link Kit, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Instructions for fitting are packed in the box.
- Finish: The metal parts are powder coated for durability.
- Material: Built from polyurethane.
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
Specifications
| Part Number | KCA452 |
| Part Name | Control Arm Bushing |
| Vehicle | 1997 Mazda MX-5 Miata STO |
| Chassis Code | NA/NB |
| Bushing 1 Inner Diameter | 15 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 14.3 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 40.3 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber - "Approved for Spec Miata in both SCCA and NASA" |



