Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1993 Mazda MX-5 Miata LE (NA). Whiteline part number: KCA452. It goes on the front of the vehicle. Chassis code: NA. In the box: 4 bushings and 4 tubes. Application note: Adds 0.5 degrees Camber: "Approved for Spec Miata in both SCCA and NASA".
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Sway Bar Vehicle Link Kit, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit for the MX-5 Miata.
Features
- Camber adjustment: Aims to keep camber in an effective range as the body rolls.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Install guide: Whiteline packs an install guide with it.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Finish: The metal parts are powder coated for durability.
Specifications
| Part Number | KCA452 |
| Part Name | Control Arm Bushing |
| Vehicle | 1993 Mazda MX-5 Miata LE |
| Chassis Code | NA |
| Bushing 1 Inner Diameter | 15 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 14.3 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 40.3 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber - "Approved for Spec Miata in both SCCA and NASA" |




