Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1991-2003 Mazda MX-5 Miata SE (NA/NB). The kit contains 4 bushings and 4 tubes. Whiteline's note for this fit: Adds 0.5 degrees Camber: "Approved for Spec Miata in both SCCA and NASA". This part is for the front of the vehicle. Part number KCA452.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link for the MX-5 Miata.
Features
- Material: Polyurethane construction.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA452 |
| Part Name | Control Arm Bushing |
| Vehicle | 1991-2003 Mazda MX-5 Miata SE |
| Drivetrain | RWD |
| Chassis Code | NA/NB |
| Bushing 1 Inner Diameter | 15 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 14.3 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 40.3 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber - "Approved for Spec Miata in both SCCA and NASA" |



