Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1990-1995 Honda Civic EX (EF/EG). Position: front. Order it as part number KCA378. Chassis code: EF/EG. You receive 4 bushings and 4 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Civic, see Adjustable Rear Upper Control Arm Set, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
Specifications
| Part Number | KCA378 |
| Part Name | Control Arm Bushing |
| Vehicle | 1990-1995 Honda Civic EX |
| Chassis Code | EF/EG |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 34.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34.4 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | 34mm OD bushing adds 1.0 Degrees |


