Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (Anti-Lift/Caster) fits the 2010 Volkswagen Jetta TDI Cup Edition (1K). The kit contains 2 housings. Whiteline's note for this fit: Adds +0.5 degrees Caster + Anti-Lift. Whiteline part number: KCA316. It goes on the front of the vehicle.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Expect a difficult job of about 2 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit for the Jetta.
Features
- Caster: Adds caster for steadier steering and better tire contact in roll.
- Install guide: Whiteline packs an install guide with it.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
Specifications
| Part Number | KCA316 |
| Part Name | Control Arm Bushing |
| Vehicle | 2010 Volkswagen Jetta TDI Cup Edition |
| Chassis Code | 1K |
| Bushing 1 Inner Diameter | 18.8 mm |
| Bushing 1 Length | 39.5 mm |
| Bushing 1 Outer Diameter | 29 mm |
| Bushing 2 Inner Diameter | 29 mm |
| Bushing 2 Length | 55 mm |
| Bushing 2 Outer Diameter | 65.7 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Color | Gold |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Housings |
| Material | 6061-T6 Billet Aluminum |
| Mounting Hardware Included | No |
| Outside Diameter | 29 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +0.5 Degree Caster + Anti-Lift |




