Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing (66.3mm OD) fits the 2001-2005 BMW 320i 3 Series (E46). The part number is W52605. Position: front. Whiteline's note for this fit: Standard Replacement. The kit contains 2 shell bushings and 2 bushings.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Strut Tower Brace Quick Release Kit for the 320i 3 Series.
Features
- Install guide: Instructions for fitting are packed in the box.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Material: The part is made of polyurethane.
- Bonded design: A bonded design adds strength for high load applications.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W52605 |
| Part Name | Control Arm Bushing |
| Vehicle | 2001-2005 BMW 320i 3 Series |
| Drivetrain | RWD |
| Chassis Code | E46 |
| Bushing 1 Inner Diameter | 37.4 mm |
| Bushing 1 Outer Diameter | 66.3 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | 66.3mm OD - Standard Replacement |


