Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2008-2010 Chrysler Sebring LX (JS). Included: 2 shell bushings and 2 tubes. It goes on the front of the vehicle. Whiteline's note for this fit: Standard Replacement. Part number W53382.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the Sebring, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Install guide: Step-by-step installation instructions come with it.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2010 Chrysler Sebring LX |
| Chassis Code | JS |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




