Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2007-2012 Dodge Caliber SE, SXT (PM). The part number is W53382. Whiteline's note for this fit: Standard Replacement. Position: front. Included: 2 shell bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Caliber: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Material: Polyurethane construction.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Install guide: Written install instructions are included with the part.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2012 Dodge Caliber SE, SXT |
| Drivetrain | FWD/AWD |
| Chassis Code | PM |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




