Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2005-2011 Chevrolet Aveo LT (T200/T250). Part number W52401. Whiteline's note for this fit: Standard Replacement. You receive 2 shell bushings, 4 bushings, and 2 tubes. This part is for the front of the vehicle. Chassis code: T200/T250.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Aveo: 12mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Front Sway Bar Link.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: Built from polyurethane.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W52401 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2011 Chevrolet Aveo LT |
| Chassis Code | T200/T250 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


