Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 1993-1996 Toyota Supra Base, Twin Turbo (A80). Included: 4 bushings and 2 tubes. Part number W51232A. Application note: Suits models to. It goes on the front of the vehicle.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Supra, see Adjustable Front Sway Bar Link, Front and Rear Sway Bar Kit, and Front Steering Rack And Pinion Mount Bushing.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Install guide: Whiteline packs an install guide with it.
- Material: Built from polyurethane.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | W51232A |
| Part Name | Control Arm Bushing |
| Vehicle | 1993-1996 Toyota Supra Base, Twin Turbo |
| Chassis Code | A80 |
| Bushing 1 Inner Diameter | 16.2 mm |
| Bushing 1 Outer Diameter | 54.8 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Suits models to - 6/96 OD = 54.8mm |

